PFSK152 ABB 信号集中器板供应全系列型号库存优势
ABB型号名称：PFSK 152
出生国家：瑞典(SE)
总重量：0.5公斤
说明：PFSK152连接DSP-UP(PLD 1.0/1)
定做：不
介质说明：信号集中器板
最小起订量：1件
订购倍数：1件
包裹级别1毛重：0.5公斤
包装级别1单位：1件
零件类型：新的
PFSK152编程器是PLC的重要外围设备。利用编程器将用户程序送入PFSK152的存储器，还可以用编程器检查程序，修改程序，监视PFSK152的工作状态。常见的给PFSK152编程的装置有手持式编程器和计算机编程方式。在可编程序控制器发展的初期，使用专用编程器来编程。pfsk152小型可编程序控制器使用价格较便宜、携带方便的手持式编程器，大中型可编程序控制器则使用以小CRT作为显示器的便携式编程器。专用编程器只能对某一厂家的某些产品编程，使用范围有限。手持式编程器不能直接输入和编辑梯形图，PFSK152只能输入和编辑指令，但它有体积小，便于携带，可用于现场调试，价格便宜的优点。
Programmer is an important peripheral equipment of PLC.The programmer is used to send the user program into the memory of pfsk152.The programmer can also be used to check the program,modify the program and monitor the working state of pfsk152.
Common devices for programming pfsk152 include handheld programmer and computer programming mode.In the early days of the development of programmable controller,special programmer was used to program.Small programmable controllers use hand-held programmers that are cheap and easy to carry,while large and medium-sized programmable controllers use portable programmers with small CRTs as displays.The special programmer can only program some products of a certain manufacturer,pfsk152and the scope of use is limited.The hand-held programmer can not directly input and edit the ladder diagram,and pfsk152 can only input and edit instructions,but it has the advantages of small volume,easy to carry,can be used for on-site debugging and low price.
